Portfolio of Our Work

The Litchfield Pair

Our client asked us to design and automate a pair of beautiful metal gates. Our team of designers and blacksmiths designed and manufactured this pair of stunning metal gates. Once the gates were made in our factory, they were hot-dip galvanised and sprayed in our paint shop. Our team of gate engineers fitted and fully-automated the gates. The gates have been automated with underground automation. We have also supplied and fitted a hardwired video and intercom keypad system. We also fitted a security video camera which we mounted onto a powder coated metal post.

Norton Grange

Our client asked us as a company to design the frontage of his property. Our team of time-served bench joiners manufactured the hereford pair and also the side panels. Our client chose to use a iroko hardwood. Our dedicated team of expert fitters fitted the gates and panels. We also supplied and fitted the oak posts, which were sourced from our sister company, Border Hardwood Limited.

Once our team of engineers had fitted the gates and panels, we then fully automated the gates using underground opperators. We have also supplied and fitted a GSM Intercom Keypad System aswell as safety edges and a loop ground detector. Our team of paint decorators then oiled the gates, panels and oak posts with osmo oil.

Our team of bench joiners manufactured the house sign in prime oak for our client.

This photograph shows the design of the gate from the inside of the property.

Our client also asked us to manufacture a bespoke design of gate, similar to the hereford pair but taller in the centre. Our team of time-served bench joiners manufactured the gates in our factory in iroko hardwood. Our team of fitters then fitted the gates. The gates were then oiled by our team of decorators.

Our client asked us if we could manufacture a bespoke letterbox, which we did with our team of time served craftmen.

This image is a heavy duty ornate ring latch.

This image shows the design of the gate from the inside of the property.

Before

Before

I approached The UK Electric Gate Company as I wanted a set of high quality wooden gates that would make a statement on arrival to my house and also offer security and privacy.

From my initial phone call, I was paid a site visit by Richard the owner who was polite courteous and also knowledgeable in his product. A big factor also was that they do all the work including pillars, fencing and all the installation including the electrics, a one stop service and total control on the project from start to finish.

The result was stunning, they have far exceeded my expectations, the quality of the wood, automation and finish is fantastic and I have had nothing but compliments from the neighbours, I am delighted with them.

One thing I liked was how approachable everyone in the team was and how knowledgeable each and every one of them was.  Richard, Dale, Mike, Alan and Andy all work together well and really care about what they are doing, they carry out their work very professionally and it is clear to see they really care about the end result. They were a joy to have on the premises.

I would without a doubt recommend Richard and his team if you are looking for gates as you will not be disappointed. Thank you to everyone for a wonderful job, I am a very satisfied customer.”

Mark

The Hereford Pair, Warwick

Our client asked us to design and fit a pair of bespoke gates which would give her security and would also allow keypad entry for horse riding and entry for vehicles.

Our team of bench joiners manufactured the gates in our factory. our team of painters oiled the gates. Our team of engineers went to site to fit the oak posts.

Our team of engineers hung the gates and fully automated the gates. For horse riders, we supplied and fitted a keypad on top of an oak post and for vehicles, and we supplied and fitted a WiFi GSM intercom system for vehicles. The gates are fully automated using an underground system. We also supplied and fitted a safety loop and an exit loop.

The Gobowen

Before

Our client wanted us to redesign his driveway. Our team of designers, designed the brick pillars and the walling either side for our client. Our team of brick layers then constructed the new brick walling and brick pillars. Our team of blacksmiths manufactured the metal frame, which was then powder coated black. Our team of bench joiners then fully boarded the gate, once the gate was fully constructed, our painter then oiled the gate to achieve a stunning finish. Once achieving the perfect finish our team of automation engineers then fully fitted and automated the gate. The gate is fully automated as a cantilever gate, we have also supplied and fitted a GSM Intercom Keypad System, which will operate the gate anywhere in the world.

The Chester Gate

Our client asked us to design a pair of handcrafted sapele gates which would be in keeping with their rural location. Our team of bespoke joiners manufactured the gates. Our team of engineers fitted the beautiful oak posts. We then fully-fitted the handcrafted sapele gates. Our team of engineers fully-automated the gates with underground automation. We also supplied and fitted a GSM intercom keypad system. We also supplied and fitted a loop in-ground detector which prevents the gates from closing onto vehicles.

The Stretton Pair – Earnstrey Hill House

Before

Our client wanted a pair of our Stretton metal gates and side railings. Our team of blacksmiths manufactured the gates in our factory using traditional blacksmithing techniques. The gates were then powder coated. Our team of automation engineers fitted the metal gate posts, the gates and the railings. The gates were then fully-automated using underground operators. We also fitted a GSM intercom keypad system, as well as a keypad for exit and an in-ground loop detector for auto exit.

The Wellington Pair –  Erdington Mill

Before

Our client wanted a pair of fully automated oak wellington gates with oak posts and to have a small side gate for pedestrian access.

Our team of engineers fitted the oak posts and new oak gates. Our engineers then fully automated the gates.

The Craven Pair – Newcastle

Before

Our client ordered a beautiful pair of craven oak gates. The gates were manufactured by our team of bench joiners in our factory. Our team of automation engineers fitted the oak posts as well as fully automating the gates with underground automation. We fitted for our client, a wireless intercom keypad system.

We have also fitted a loop in-ground detector.

The Worcester Pair – Mayhouse Farm

Before

Our client wanted a pair of oak gates with a pedestrian gate and wanted a similar design to our Wellington Pair but with privacy. Our team of designers designed the Worcester Pair. Our team of bespoke bench joiners manufactured the gates in our factory. Once the oak gates were made, they were oiled with 3 coats of osmo oil.

Our team of automation engineers then fitted the oak posts and also the oak gates and pedestrian gates. Our team of automation engineers then fully automated the gates with underground automation. We also fitted a GSM intercom keypad system and also a safety loop. The pedestrian gate has a Maglock fitted and a hardwired keypad either side for entry and exit.

The Droitwich Cantilever – Elmbridge

Before

We were asked by our clients to manufacture a wrought iron cantilever gate which would be in keeping with their property. Our team of designers designed the gates for our client. Our team of blacksmiths manufactured the gates in our factory using traditional blacksmithing techniques. The gate was then powder coated.

We also fitted for our client, a wireless intercom keypad system for entry and a hardwired standalone keypad for exit.

The Hereford Pair – Hagley

Our client wanted a pair of our beautiful Hereford gates.

The gates were manufactured in our factory by our time-served craftsmen. Our team of engineers fitted the gates, we then fully automated the gates with underground automation, a safety loop and a wireless keypad for exit and entry.

The gates were painted prior to installation by our team of painters – the colour of the gate is anthracite grey.

The Berkshire Pair – Micklethwaite

Before

Our client wanted a beautiful pair of hardwood gates supplied and fitted and fully-automated.

Our team of builders extended the stone pillars in height.

The gates are made in sapele hardwood and have been fully automated underground. We have supplied and fitted a GSM intercom system.

We have also fitted a safety loop and also an exit loop.

The Shrewsbury Pair (Sapele Hardwood)

Our client asked us to design and manufacture a pair of automatic hardwood gates. Our team of designers designed the automatic gates and these were manufactured in our factory by our team of time served bench joiners. The gates are manufactured in sapele hardwood and they have been oiled with three coats of osmo oil by our senior painter, Alan.

The hinges are handcrafted by our team of blacksmiths and they have been powder coated. The gates are fully automated underground and we have fitted two number looped inground detectors and also a GSM intercom keypad system.

Before

The client also asked us to design and manufacture manual hardwood gates for the property. The gates were also manufactured in sapele hardwood and were oiled with three coats of osmo oil.

The hinges on both of the manual gates are handcrafted by our team of blacksmiths and they have been powder coated.

Edgmond Manor House

Our client asked us to design and manufacture a pair of automated hardwood gates. Our team of designers designed the gates and they were manufactured in our factory by our team of time served bench joiners. The gates are manufactured in sapele hardwood and they have been oiled with three coats of osmo oil by our senior painter, Alan.

The hinges are handcrafted by our team of blacksmiths and they have been powder coated. The gates are fully automated underground and we have fitted two number looped inground detectors and also a GSM intercom keypad system.

The Oswestry Gate

Before

The client requested us to design and build a new frontage to their property. Our design team designed the frontage as seen on the above photograph.

Our team of bricklayers undertook the digging out and concreting of all of the foundations to the brick-walling. They then undertook all brickwork and the building of the brick pillars. We supplied and fitted both sandstone pier caps. The front mouth of the driveway, we dug out and we retarmacked.

The gate is manufactured in prime European oak and was hand-built by our team of bench joiners in our factory. All of the oak provided is from our sister company Border Hardwood Ltd. The gate was then beautifully oiled using Osmo oil.

The gate has been fully automated above ground and we also fitted a 600kg mag system. We have also fitted 3-number loop in-ground detectors for auto exit and safety devices.

The Kiddersminster Pair

Our client asked us to design and manufacture a beautiful pair of metal framed gates. Our blacksmith manufactured the frame which was then powder coated. Our bespoke joiners then fully boarded the frame with Iroko tongue and groove boards. The gates were then beautifully oiled in our painting shop with our team of painters. Our team of engineers then fitted and fully automated the gates for our client. The gates are fully automated with underground automation.

The Hereford Pair

Before

Our team of designers  designed the Hereford pair and also the Iroko panelling for our client. The gates are hand crafted by our time served bench joiners in our factory. They are manufactured in Iroko hardwood and have been oiled with three coats of Osmo oil in our painting shop by our team of time served gate decorators. Our team of automation engineers have automated the gates using underground premium gate automation. We have also supplied and fitted for our client a GSM intercom keypad system. We also fitted safety edges which are always fitted as standard.

The Wellington Pair (Prime European Oak)

Our client chose the Wellington pair design from our website and opted to have the gates manufactured in prime quarter sawn European oak. The oak came from our sister company, Border Hardwood ltd, and all the oak we use as a company comes from renewable sources. We supplied and fitted the oak posts and the gates and we also fully automated them underground. The gates were then oiled with Osmo oil in our painting shop.

The Wellington Pair (Iroko Hardwood)

This is a recent installation of our hand-crafted Iroko gates and oak posts. The gates have been fully automated using the Beninca underground automation.

The Bristol Telescopic Gate

Telescopic Sliding Gates

Telescopic sliding gates use individual panels that overlap each other as the gate opens. These are ideal for properties with short driveways that are limited on entrance space.

These trisliding (3-panel) gates were handmade by our team of expert blacksmiths.

The Kensington Pair

The frame is manufactured in stainless steel and the timber boards have been smoked to have a burnt effect. The gates are fully automated underground. We have also supplied and fitted the pedestrian gates.

The Northampton

The UK Electric Gate Company Ltd undertook the building of the pillars and all ground works for our client. The Northampton sliding gate is manufactured in mild steel using traditional blacksmithing techniques, and has been galvanised and powder coated by our team of blacksmiths. The gate has been fully automated as a sliding gate. We have also fitted a GSM Intercom keypad system.

The Ascot

The Ascot gate was designed by our design team for our client. They are handmade in our blacksmithing factory using traditional blacksmithing techniques.
Once the gates were made, they were then hot dipped galvanised and powder coated to the clients chosen colour.

Our team of engineers undertook all ground work at the property and we also undertook all necessary electrical work.

The gates have been fully adapted as a sliding gate by our team of automation engineers. We also fitted a GSM intercom keypad system. This device will operate your gates anywhere in the world.

The Windsor Pair

The Windsor pair are manufactured by our team of highly skilled bench joiners. They are manufactured using traditional joinery techniques. All joints are morticed and through tenonned and all joints are hardwood pegged.

The gates have been manufactured in Sapeli hardwood. The gates have been fully automated above ground by our team of automation engineers with safety edges being fitted as standard.

We also fitted a GSM intercom keypad system. This device will operate your gates anywhere in the world.

The Stretton Pair

Our design team designed the Stretton Pair and the railings either side. The gates were hand-made by our team of blacksmiths. The gates were then galvanised and painted in our spray shop by our team of painters. The gates have been fully automated underground and we also fitted a hundred and eighty degree operators. Also fitted is a loop-in ground detector for auto exit and also a loop-in ground detector for safety.

The Hereford Pair

Our client ordered the Hereford Pair in Iroko with our company and our team of bench joiners manufactured them. We also supplied and fiited the Oak posts finely sanded and oiled and we fully automated the gates underground.

Our client chose the Hereford Pair design. Our team of bench joiners manufactured them in sapeli Hardwood and our team of painters oiled them with Osmo oil. We then fully automated the gates above ground and we also fitted for our client a wireless intercomm keypad system.

AES GSM Intercom Keypad System

Pair of BENINCA Safety Beams

Wireless Keypad System